Products tagged with roof vent

Rooftop Dryer Vent / Exhaust Vent

Mon, 06 Feb 2012 13:41:47 +0000

Made of 16 ounce copper or stainless steel
Can be used on flat or pitched roofs
Perfect application for dryer, stove, and bathroom vents
Configurable with one way flapper and screen
Pipe connection length is 5" (standard)
Pipe connection is made of stainless steel, preventing electrolysis

Dryer Vent Note: If you are using this product to vent a dryer it should not be ordered with a screen. Order with flapper only. A screen can catch the lint from your dryer causing a fire hazard.

Intake Vent Note: If you are using this product as an intake vent or to exhaust a fireplace then order with screen only. The one way air damper (flapper) only lets air out.

$125.00

Attic Roof Vent

Mon, 06 Feb 2012 13:41:47 +0000

Made of strong 16 ounce copper or stainless steel
Provides adequate ventilation for attic ventilation
Base flashing size is 16" x 16"
Height is 8"
Diameter of pipe is 8"
Vent is screened to keep insects and animals out

$180.00

Copper Vent Pipe Flashing w/ Rubber Coupling & Decorative Cover

Mon, 06 Feb 2012 13:41:47 +0000

Can accommodate in 1.5", 2", 3", and 4" pipe sizes
Flashing made of strong 16 ounce copper
Fernco reducer for watertight seal between vent pipe and flashing
Decorative cover attached with two self tapping screws

Please order this product in the size of the vent pipe coming through your roof. If you have a 2" pipe coming through your roof line please order a 2" Vent Pipe Flashing.

***This item is non-returnable and non-exchangeable because it is custom made***

$72.00

Roof Jack

Mon, 06 Feb 2012 13:41:47 +0000

Available in sizes that can accommodate up to a 5" pipe
Strong 16 ounce flashing
Custom made for the pitch specified by the customer
Unique copper t-top cap

***This item is not returnable or exchangeable because it is custom made***

$130.00

Vent Stack

Mon, 06 Feb 2012 13:41:47 +0000

Made of strong 16 ounce copper
Available with 1.5", 2", 3", and 4" bronze fittings
12" copper stack
Pitched to customer specifications

This vent stack is designed for an application in which the pipe connection is made below the roof line. If your vent pipe is already coming up through your roof line please look at our Vent Pipe Flashing with Fernco Coupling or the Roof Jack Vent.

***This item is not returnable or exchangeable because it is custom made to the pitch specified by the customer***

$78.00

Low Profile Attic Roof Vent

Mon, 06 Feb 2012 13:41:47 +0000

Made of strong 16 ounce copper
Low profile design with 6.7" height
27" x 28" flashing dimensions
38 sq inches of net free airflow
Screen to keep unwanted elements out

$126.00